Dodge radio code from the serial number

Radio showing Enter Security Code? Type the serial it shows on that screen, or the one on its label (it starts with T), and get the four-digit anti-theft code: Ram, Charger, Challenger, Journey, Durango, Grand Caravan.

12 to 14 characters that start with T · Where is it?
Money back if the code fails
  • Money back if the code fails
  • Price shown before you pay · no account, no survey
  • Dodge, Ram, Chrysler and Jeep radios: the same serials

Step 1 · Find the serial

Where is the serial of a Dodge radio? Often on the screen

The code is worked out from the radio's own serial number, not from the car. A Dodge radio with a touchscreen shows that serial on the screen that asks for the code. On the others it is on the label on the radio's case. Either way it starts with the letter T and is twelve to fourteen characters long.

What to look for

Find yours: the screen and three labels

Pick the one that looks like yours. The serial is the line in the orange frame.

Touchscreen of a locked Dodge radio: Security Screen, Enter Security Code, and under it Serial Number T00BE297156203, marked

Touchscreen

On the lock screen, under "Serial Number"

A locked touchscreen radio prints its serial on the screen that asks for the code. Nothing has to come out of the dashboard.

On the screen
T00BE297156203
You type
T00BE297156203
The code
On your screen, seconds after you pay
Type your serial ↑ After the T come two zeros, not the letter O.
Chrysler Corporation label on the case of a radio, with the line SERIAL NO. T 00 AM 043 4 C0081 marked

Large label

On the large label, the line SERIAL NO.

A Dodge radio carries a Chrysler label. The serial is the one line marked; nothing else on the label is needed.

On the label
T 00 AM 043 4 C0081
You type
T00AM0434C0081
The code
By email, half of them within three and a half hours
Type your serial ↑ After the T come two zeros, not the letter O.
White Chrysler Group sticker on a radio, with the line S/N T 19 QN 107 2 16535 marked

White sticker

On the white sticker, the line S/N

The serial is the line that starts with S/N. Nothing else on the sticker is needed.

On the sticker
T 19 QN 107 2 16535
You type
T19QN107216535
The code
By email, half of them within three and a half hours
Mopar label on a newer radio, with the serial T M9 346 0 02290 marked between the two barcodes

Mopar label

On the Mopar label, between the barcodes

On the newer radios the serial is on the left of the label and starts with T M9.

On the label
T M9 346 0 02290
You type
TM9346002290
The code
On your screen, seconds after you pay
Type your serial ↑ Not the line "SERIAL: 700142" on the right of the same label: that is the one typed by mistake.

How to get to the serial

Try the screen first: it costs nothing. The label is for radios that do not show it. Swipe for the other one.

No tools

Read it from the screen

Radios with a touchscreen

  1. Switch the ignition on and let the radio start.
  2. It opens on the Security Screen. Under "Enter Security Code" it prints "Serial Number" and the serial.
  3. Write it down or take a photo of the screen.

You need nothing. If the screen asks for a code and shows no serial, the label is the way.

Trim and screws

Read it from the label

Radios with buttons, and any radio out of the car

  1. Unclip the trim panel around the radio.
  2. Undo the screws that hold the unit, usually four.
  3. Slide it forward and read the label on its case: top, side or back.

You need a plastic trim tool and a screwdriver or a small socket. Not sure how yours comes out? Ask us in the chat before you pull.

The wiring stays connected throughout. Take a photo of the label before the radio goes back in; if a code ever fails, the photo is what we check it against.

Got the serial? Send it.

Type it in the form, or photograph the label and let us read it, look-alikes included.

What your serial starts with decides how fast

Some Dodge codes are calculated from the serial and are on your screen seconds after you pay. Others have to be looked up by hand: those come by email, a quarter of them within an hour, half within three and a half hours, nine in ten within ten hours. The form tells you which kind yours is before you pay.

Serial starts withExampleThe code
T00BET00BE297156203In seconds
TM9TM9346002290In seconds
T, two characters, AATQ1AA109923307In seconds
TQN or TVPQNTVPQN0965109GDIn seconds
T00AMT00AM0434C0081By email, within hours
T, two digits, QNT19QN107216535By email, within hours
T0MYD or T0BYDT0MYD332010674By email, within hours

What we cannot do, said up front

This is the anti-theft code of the factory radio. It is not the Uconnect account PIN or a Bluetooth pairing PIN, and it does not unlock a radio fitted after the car left the factory (Pioneer, Kenwood, Alpine and the like have codes of their own). A serial that does not start with T: send us a photo of the label in the chat before you order.

Step 2 · Enter the code

How to enter a Dodge radio code

Four digits. On a touchscreen radio they go in on the same screen that showed you the serial.

Touchscreen radios

On the Security Screen

  1. Switch the ignition on. The radio opens on the Security Screen and asks for the code.
  2. Type the four digits on the keypad on the screen. The key with the cross deletes a wrong digit.
  3. Confirm with the key under the digits (ENT on most screens). The radio starts, and it does not ask again while it stays in this car.

Radios with buttons and no touchscreen

With the buttons of the radio

  1. Switch the radio on. The display asks for the code.
  2. The four digits go in with the buttons of the radio. Which buttons depends on the unit.
  3. Send us a photo of the radio's front in the chat and we tell you the keys for yours before you type anything.

We say this rather than print one recipe for every unit: a wrong try counts.

Three wrong codes and the radio makes you wait

Take the digits from the email rather than from memory. After three wrong codes in a row the radio stops taking codes for a while: owners report about thirty minutes, with the ignition left on. Guessing only brings that on. If a code we sent does not unlock the radio, tell us in the chat before the third try: we check the serial against your photo, and you get the money back if we cannot put it right.

Before you pay anyone

Can I get my Dodge radio code for free?

Sometimes. Three places are worth ten minutes of looking.

  1. The car's papers. A card or a sheet with the radio's serial number and a four-digit anti-theft code beside it, in the owner's manual wallet.
  2. A sticker or a note. Dealers and earlier owners often wrote it inside the manual's cover or in the glovebox.
  3. A Dodge dealer. Looks the code up from the VIN and the radio's serial, with proof of ownership. Some do it for free; most charge, and for a radio that came from another car they may not have it.

Nothing there? Our service is for the radio in front of you, whatever car it came from. You see the price before you decide, and the code is for your serial, not from a list. Get the code ↑

Not a fault

Why does a Dodge radio ask for a code?

Dodge factory radios carry a four-digit anti-theft code tied to the unit's serial number. The radio asks for it when it no longer recognises where it is:

  • Unit moved to another car
  • Used or repaired radio fitted
  • On some units, a flat or disconnected battery
  • The usual case is a radio from another vehicle. A used unit from a breaker's yard or an online seller asks for its code the first time it is switched on in your car.
  • The code belongs to the radio and does not change, which is why it can be retrieved from the serial alone, and why the code in your own car's papers does not work on a radio that came from somewhere else.

Questions

Dodge radio code questions

Short answers to what drivers ask most. If yours is not here, ask us: a person answers.

282
Dodge radios unlocked
98%
of codes work

Written and kept up to date by the RadioUnlock team. Updated November 2026.

How much does a Dodge radio code cost, and how fast is it?

A Dodge code costs from $12.99 in the United States (£11.99 in the UK). The price is set per country and is shown as soon as the serial is identified, before you pay. How fast depends on the serial. Serials that start T00BE, TM9, TQN, or T with AA as the fourth and fifth characters are calculated: the code is on your screen seconds after the payment. Serials that start T00AM, T0MYD, or T with two digits and QN are looked up by hand: of those, a quarter arrived within an hour over the last twelve months, half within three and a half hours and nine in ten within ten hours. Every code also arrives by email. You pay by card, Apple Pay or Google Pay, and if the code does not unlock your radio you get the money back.

Which Dodge models does it work for?

Any Dodge with its factory radio whose serial starts with T: Ram, Charger, Challenger, Journey, Durango, Grand Caravan, Dart, Avenger, Caliber and Nitro among them. The code follows the radio, not the car, so what matters is the serial. Type it in the form and you see at once whether we recognise it, before you pay.

Where is the serial number of a Dodge radio?

On a touchscreen radio, on the screen itself: the Security Screen that asks for the code prints "Serial Number" and the serial under it. On other radios it is on the label on the case, on the line SERIAL NO. or S/N, which means sliding the radio out of the dashboard. It starts with T and is twelve to fourteen characters long.

The label has two serials. Which one?

The one that starts with T. Newer Mopar labels also carry a line "SERIAL:" with six digits; that is a different number and no code can be made from it. The part number (P0509…, 6847…) is not the serial either.

Do I type the spaces, and is it a zero or the letter O?

No spaces: the label prints T 00 AM 043 4 C0081, you type T00AM0434C0081. The two characters after the T in T00AM and T00BE are zeros. If you are not sure about a character, use the Scan option and we read the label for you.

Is this a Dodge radio code generator or calculator?

For the serials that are calculated, in effect yes: the four digits follow from the serial, and that is what is worked out here. There is no formula you could apply by hand and no program to download. The other serials cannot be calculated at all; their codes are looked up, which is why they take hours and not seconds.

Can I get the code from the VIN?

A Dodge dealer can look it up from the VIN together with the radio's serial, for the radio the car was built with. We work from the serial alone, because a radio can end up in any car. If the unit is second-hand, the serial is the only way.

Will the code work on a radio from another car?

Yes, that is the usual reason people need one. The code belongs to the radio, so a used unit unlocks with the code for its own serial, whatever car it is fitted to.

Is this the same as the Uconnect PIN?

No. The Uconnect account PIN and the Bluetooth pairing PIN are set by the owner and have nothing to do with the anti-theft code. The anti-theft code is four digits, fixed for the life of the radio, and it is what the Security Screen asks for.

I entered the code and the radio says to wait. What now?

A wrong code went in three times. The radio stops taking codes for a while; owners report about thirty minutes with the ignition left on. Then check the serial you sent us character by character against the screen or the label, zeros and letters O first, and write to us in the chat before trying again.

My Ram, Chrysler or Jeep radio asks for a code too. Same service?

Yes. Ram, Chrysler and Jeep radios carry the same serials and the same kind of code; the form on this page takes them as well.

← Back to models